Small Businesses
Tech Companies
Motor & Fleet
Tradies & Construction

Trade Qualifications in Australia: What Each Trade Needs

November 17, 2026
a list item
15 Mins Read
Trade Qualifications in Australia: What Each Trade Needs

Written by upcover's editorial team · Updated November 2026

Trade qualifications in Australia are usually a nationally recognised Certificate III, often through an apprenticeship, and some trades also need a state or territory licence.

Qualified tradespeople who work for themselves often look into insurance for tradies as they set up.

Key takeaways:

  • Qualifications are national; each state and territory sets its own licensing rules.
  • Electricians need to show minimum capabilities before a licence is granted in any state or territory, each with its own regulator; plumbing is also a licensed occupation.
  • Painters, plasterers and tilers can need a licence in NSW and Queensland (Building Commission NSW; QBCC).
  • CPC30326 Certificate III in Carpentry was released in September 2026 (training.gov.au).
  • White cards are accepted across Australia (Safe Work Australia).

Trade qualifications at a glance

Trade National qualification (code) Licensed? Licensed by (examples)
Electrician UEE30820 Certificate III in Electrotechnology Electrician Every state and territory Electrical regulators
Plumber CPC32420 Certificate III in Plumbing Every state and territory Plumbing regulators
Carpenter CPC30326 Certificate III in Carpentry Some states, including NSW and Queensland Building Commission NSW, Queensland Building and Construction Commission (QBCC); see how to become a carpenter
Painter CPC30620 Certificate III in Painting and Decorating NSW and Queensland; WA registers painters Building Commission NSW, QBCC, Building and Energy WA
Plasterer CPC31020 Certificate III in Solid Plastering or CPC31220 Certificate III in Wall and Ceiling Lining Some states, including NSW and Queensland Building Commission NSW, QBCC
Tiler CPC31320 Certificate III in Wall and Floor Tiling Some states, including NSW and Queensland Building Commission NSW, QBCC
Roofer CPC32620 Certificate III in Roof Plumbing or CPC30820 Certificate III in Roof Tiling Licence classes in NSW and Queensland Building Commission NSW, QBCC
Landscaper AHC30921 Certificate III in Landscape Construction Structural landscaping in NSW and Queensland Building Commission NSW, QBCC
Gardener AHC30722 Certificate III in Horticulture Irrigation work in Queensland QBCC

Swipe left or right to see the full table.

Codes as listed on training.gov.au as at November 2026 (CPC, UEE, AHC). Licence classes: Building Commission NSW, the QBCC and Building and Energy WA.

What are trade qualifications in Australia?

A trade qualification is a nationally recognised vocational qualification, usually a Certificate III, issued by a registered training organisation (RTO) after training and assessment, as explained by the Australian Skills Quality Authority (ASQA) and the ACT Government.

Each one has a code on training.gov.au, the national register, and Certificate III trades often list no entry requirements. Codes are also updated: CPC30326 Certificate III in Carpentry, first released in Training Package Release 11.0, lists the earlier CPC30220 as equivalent.

Is a trade qualification the same as a trade licence?

A trade qualification shows you've been trained and assessed, while a licence from a state or territory regulator permits regulated work, often with extra requirements.

Question Trade qualification Trade licence
Who issues it A registered training organisation A state or territory regulator
Where it applies Nationally In that state or territory
What it shows Training and assessment completed Permission to do regulated work

Swipe left or right to see the full table.

Trades Recognition Australia says "You may need a Certificate III Australian VET qualification for a full licence". NSW electrical licence types include a contractor licence, a qualified supervisor certificate and a "Provisional tradesperson certificate".

A builder's licence is separate again, for building work beyond a single trade class.

What qualifications does each trade need?

Many trades have their own Certificate III, listed by code on training.gov.au. Carpenters have a guide on how to become a carpenter, and handymen can read about training for handymen.

What qualifications do you need to be an electrician?

Electricians train in UEE30820 Certificate III in Electrotechnology Electrician, usually as apprentices, then apply for a licence from their state or territory electrical regulator. NSW's Pathway A to an electrical licence named UEE30820. upcover's guide to the NSW electrical licence explains the steps.

Queensland apprentices who finished in the last three years apply with Form 10. Their RTO sends the completion statement to the Electrical Safety Office (WorkSafe Queensland).

What qualifications do you need to be a plumber?

Plumbers train in CPC32420 Certificate III in Plumbing, then get a licence from their state or territory plumbing regulator. A NSW tradesperson certificate generally asks for "Certificate III in Plumbing (CPC32420 or later)". upcover also has a guide to the plumbing licence in Victoria.

How do you become a painter in Australia?

Painters commonly train in CPC30620 Certificate III in Painting and Decorating, and licensing requirements for painting work differ between states and territories.

NSW lists CPC30620 among the qualifications for a painting contractor licence (Building Commission NSW). The QBCC issues a painting and decorating licence, and WA registers painters for work above a set value (Building and Energy WA).

What qualifications do you need to be a plasterer?

Plasterers commonly train in CPC31020 Certificate III in Solid Plastering or CPC31220 Certificate III in Wall and Ceiling Lining, depending on the work. Wet plastering and dry plastering are separate trade work classes in NSW, and the NSW wet plastering licence lists CPC31020. Queensland issues plastering drywall and plastering solid licences.

How do you become a roofer?

Roofers commonly train in CPC32620 Certificate III in Roof Plumbing or CPC30820 Certificate III in Roof Tiling, depending on the work. Roof plumbing and roof tiling are separate trade work classes in NSW. Queensland lists roof tiling and roof and wall cladding among its trade licences.

What qualifications do landscapers and gardeners need?

Landscapers commonly train in AHC30921 Certificate III in Landscape Construction, and gardeners in AHC30722 Certificate III in Horticulture. NSW lists AHC30921 among the qualifications for structural landscaping work.

Which trades need a licence in Australia?

Electricians need a licence in any state or territory, plumbing is a licensed occupation, and some states license other trades above a dollar threshold.

Electrical and plumbing regulators by state and territory

State or territory Electrical licence Plumbing licence
NSW Building Commission NSW Building Commission NSW
Queensland Electrical Safety Office QBCC
Victoria Energy Safe Victoria Building and Plumbing Commission
Western Australia Electrical Licensing Board Plumbers Licensing Board
South Australia Consumer and Business Services Consumer and Business Services
Tasmania Consumer, Building and Occupational Services (CBOS) CBOS
ACT ACT Government ACT Government
Northern Territory NT WorkSafe Plumbers and Drainers Licensing Board

Swipe left or right to see the full table.

NSW and Queensland license painting, plastering, tiling and roof tiling as trade classes above a set job value (Building Commission NSW; QBCC licence thresholds). upcover's guides to the QBCC licence and NSW contractor licence explain each licence class.

How do you get a trade qualification?

A trade qualification commonly comes through an apprenticeship under a training contract, study with a registered training organisation or recognition of prior learning. Australian Apprenticeships "combine time at work with off-the-job training" under a training contract, and can be full-time, part-time or school-based.

Do you need a white card to start a trade?

Construction workers must show their white card to the business running the site and to any inspector who asks, according to Safe Work Australia. Getting one means completing "Prepare to work safely in the construction industry", the general construction induction unit CPCCWHS1001. "White cards are recognised Australia-wide."

Can recognition of prior learning earn you a trade qualification?

Recognition of prior learning (RPL) can count existing skills towards a qualification, and ASQA says it "recognises skills built from prior learning experience".

In ASQA's case study, the RTO assessed a portfolio, a self-assessment, an interview and a simulated skills assessment, then awarded the qualification after gap training. If you already work in a trade without a qualification, RPL is one pathway.

What if you trained overseas?

If you trained overseas, Trades Recognition Australia's OTSR "records the technical skills demonstrated against the relevant Australian VET qualification". A provisional licence comes through the state or territory licensing regulator, and gap training depends on the occupation and location.

Trade qualifications after a Certificate III

A Certificate IV can be a step towards a contractor licence, and NSW, for example, asks plumbing contractors for one.

The NSW contractor or supervisor licence for plumbing lists "Certificate IV in Plumbing and Services (Operations) (CPC40920 or later)" (Building Commission NSW). Applicants also need at least two years' combined industry experience, either with an apprenticeship or traineeship or after their plumbing qualification.

NSW general building licences list CPC40120 Certificate IV in Building and Construction and "at least two years' relevant industry experience" (Building Commission NSW).

Insurance to consider when you start working in a trade

Once you work for yourself, licences, builders and clients may ask for evidence of insurance, and tradespeople commonly consider the covers below. Cover depends on the policy and insurer you choose. Check the policy wording and its terms and conditions for what is and isn't included.

Public liability insurance is designed to cover claims if someone is injured or their property is damaged in connection with your business. One example is a client tripping over a lead on site, subject to the policy terms. Public liability insurance is commonly arranged as public and products liability insurance. Products liability insurance is designed to cover claims for injury or damage caused by a product you made, sold or supplied, once it has left your hands.

Tools of trade insurance is designed to cover the tools and equipment you use for work, against theft and accidental damage, depending on the policy.

Workers' compensation insurance is designed to cover work-related injury or illness of employees, and is required where workers fall within the relevant state or territory scheme (Safe Work Australia).

Personal accident and sickness insurance is designed to provide benefits to help protect your income if injury or illness stops you working, depending on the policy.

For tradespeople, the requirement to hold public liability insurance usually comes from a licence, contract, site or council permit (business.gov.au).

Which licences set an insurance requirement?

Some electrical and plumbing licences set their own insurance conditions.

Licence Insurance condition Source
Victoria, registered electrical contractor "public liability insurance (minimum cover of $5 million)" Energy Safe Victoria
Tasmania, electrical or plumbing contractor "Public and Products Liability (minimum $5 million)" CBOS
Queensland, electrical contractor Public and products liability "of at least $5,000,000", plus the other policy conditions WorkSafe Queensland lists WorkSafe Queensland
Victoria, licensed plumber "evidence that they hold the relevant insurance" Building and Plumbing Commission
ACT, electrician "evidence of their insurance to a client before providing a service" ACT Government

Swipe left or right to see the full table.

An upcover team member or an insurance broker can talk through what those limits mean for your business.

What do public liability and tools of trade policies commonly exclude?

Exclusions commonly include, but are not limited to:

Public liability insurance

  • the cost to redo, correct or improve your own work or fix defects, although the policy may respond to resulting damage to someone else's property
  • damage to the exact property being worked on, under a care of property being worked on exclusion
  • injury to yourself or your employees, which generally sits with workers' compensation or personal accident insurance

Tools of trade insurance

  • wear and tear, or breakdown
  • damage from a power surge
  • theft from the open air or without forced entry, such as from an open job site

Important: These lists are not exhaustive. Exclusions vary between insurers. Always refer to the policy wording and its terms and conditions for the exclusions that apply to you, and if you have questions you should speak to your insurance broker or the upcover team.

How upcover can help

upcover arranges business insurance for tradies. upcover works with 80+ insurance partners and can arrange quotes from a range of insurers.

  • 70,000+ businesses covered
  • 4.9/5 customer rating
  • Certificate of currency available once your policy is confirmed

You can request a quote for insurance for tradies online.

Frequently asked questions

Does a trade apprenticeship take a set number of years?

Australian Apprenticeships are competency-based, so training "can be completed as soon as the required skill level in the qualification is reached", according to the ACT Government. The time taken can vary with the trade and whether the apprenticeship is full-time, part-time or school-based.

Can you become a plumber without an apprenticeship?

CPC32420 Certificate III in Plumbing has no entry requirements, and experienced workers may use recognition of prior learning. For a NSW plumbing contractor licence, at least two years' experience after the Certificate III in Plumbing is one listed route.

Are trade qualifications in Australia recognised in every state?

Trade qualifications in Australia are nationally recognised, so a Certificate III is the same qualification anywhere. Licensing requirements may differ between states and territories, though some regulators offer mutual recognition, such as WA for interstate plumbers.

Do you need a licence to be a gardener?

General garden maintenance isn't on the NSW or Queensland building licence lists, but some landscaping work is. NSW licenses structural landscaping, and Queensland issues structural landscaping and irrigation licences. Some tasks, such as chemical use, may need a separate licence or permit, so the state regulator can confirm what applies.

Is a trade qualification enough to start your own business?

A Certificate III is usually the starting point for working on your own. Some trades also need a contractor licence, such as a NSW plumbing contractor licence. Larger building jobs can bring builder's licence rules; upcover's guide to the QBCC licence explains Queensland's classes.

‍

The information in this article is general information only and does not take into account your objectives, financial situation or needs. It is not legal, tax or financial advice. Qualifications are set in national training packages that are updated from time to time, and each state and territory regulator sets its own licensing rules. Check training.gov.au, Trades Recognition Australia, ASQA, Safe Work Australia and your regulator before you enrol or apply. Before deciding whether a product is right for you, read the policy wording and its terms and conditions. For personal accident and sickness insurance, also read the Product Disclosure Statement (PDS), Target Market Determination (TMD) and Financial Services Guide (FSG). upcover arranges insurance products with selected insurers and underwriters and does not compare all general insurers or insurance products available in the market.

upcover is a highly rated Australian online insurance broker making commercial insurance simpler. We work with 80+ insurance partners to arrange cover for SMEs and tech businesses, with quotes, renewals and claims help on our digital platform.